Get Instant $5 Store Coupon! >>> Enter code: 5vita in your shopping cart. ($99 min. required)

GIRON MAGNETIC SHIELDING FLEXIBLE FILM | Shielding & Protecting from Magnetic Fields

GIRON MAGNETIC SHIELDING FLEXIBLE FILM | Shielding & Protecting from Magnetic Fields
Product Code: GIRON Magnetic Shielding Flexible Film
Availability: In Stock
Price: $58.95 $54.94
   - OR -   

GIRON Magnetic Shielding Flexieble Film

GIRON is 25.5" wide and 0.01" thick (Cat. #A273) ............... $58.95 per linear foot - NOW seasonal discount atr $54.95/FT.
GIRON full roll (81 feet) (Cat. #A273-roll) ... $2999.95 per roll + SHIPPING (25% SAVINGS !!!)

NOTE: Product price slightly increases with quantity due to its weight, but FREE Shipping is still avaiable for continental US.

* Contact us for special pricing for orders above 100 feet

GIRON Magnetic Shielding Film, which does not contain Nickel, is unlike any other magnetic shielding material available on the market today. Suitable for high field strength applications requiring high saturation and goodpermeability, it is both thin and strong, and unlike Mu-metal™ it is very tolerant to bending or shaping without losing its shielding properties.  Best suitable for strong levels of magnetic fields ober one miliGauss or higher, with high saturation and low permeability alloys. 

GIRON_shielding_effectivness_graphGIRON is a woven, laminated material. Cuts neatly with snips or sheet metal tools, and can be used either flat or molded into shapes. GIRON is best performance product!

Excellent for small shields on magnets, motors, speakers and appliances such as refrigerators, vacuum cleaners etc. Also, great for lining car floor or firewall. Perfect for full or partial wall / floor shielding in rooms too! Can be glued, taped, nailed, screwed or riveted into place. Could even be used to make a (heavy weight) vest to shield a person's torso! Works with AC or DC magnetic fields (0-1000 Hz), and will tolerate temperatures from 32° to 122°F. Laminated with a 0.005 inch glass reinforced polypropylene tape which is UV sensitive, cover if installation is exposed to direct sunlight. GIRON can be installed inside a building or a car.

  • Initial permeability: 500
  • Relative permeability: 7000
  • Saturation induction: 2,0 T
  • Curie Temp.: 740°C (1364°F)
  • Weight is approx 1 lb per square foot

25.5 inch wide, 1 mm thick. Weighs 3.5 Kg/m² (about 15 pounds per 10 foot length). CAUTION: Edges are sharp!

Shielding effectiveness comparison between GIRON Shielding and other shielding materials:

How Much Area Do I need to Cover to Shield from Magnetic Radiation?Magentic_Fields_Area_testing_method

The amount of shielding that you will achieve depends on many factors, including the size and shape of the shield. When using a flat shield on a wall, floor, or ceiling to shield a source of field that is close to the shield (within 8 inches), plan to cover an area that extends at least to the 2 mG line.


1- Using your gaussmeter, slide along the surface of the wall to locate the hot spot to be shielded. 
2- Now slide the gaussmeter to the right, to the left, up, and down to identify how far you must shield to get to the 2 mG line.

Make sure to check for additional sources of magnetic field (lights, wiring, appliances and so on), that may be located inside adjacent walls, floor, ceiling or within the same room.

3134 Fait Ave.,, Baltimore, Maryland 21224. Telephone: +1-410-417-7225, E-mail: 

SEO Training by JM Internet Group © 2014 AdrProVita All Rights Reserved.