Get Instant $5 Store Coupon! >>> Enter code: 5vita in your shopping cart. ($99 min. required)

SMART METER SHIELD SET | RF SHIELDED NICKEL-COPPER FABRIC (42.5" Wide X 1 Linear Foot Long) + RF MICROWAVE ABSORBING SHEET (48" Wide X 1 Linear Foot Long)

SMART METER SHIELD SET | RF SHIELDED NICKEL-COPPER FABRIC (42.5" Wide X 1 Linear Foot Long) + RF MICROWAVE ABSORBING SHEET (48" Wide X 1 Linear Foot Long)
Product Code: SMART METER SHIELD SET
Availability: In Stock
Price: $39.95

3 or more $38.95
6 or more $37.95
10 or more $36.95
20 or more $35.95
Qty:  
   - OR -   

SMART METER SHIELD SET | RF SHIELDED NICKEL-COPPER FABRIC (42.5" Wide X 1 Linear Foot Long) + RF MICROWAVE ABSORBING SHEET (48" Wide X 1 Linear Foot Long)

Nickel/Copper RipStop+Absorbing+Grounding Cable (Cat. #A1213+A259N+259-3) ..... $39.95 per linear foot.


This is a set of two RF shielding flexible materials with grounding cord for protection from smart meter radiation. Price $39.95 is set per linear foot of both materials + grounding cord per order.
 
MATERIAL 1.
Nickel-Copper RF Shielding Fabric is REFLECTING RF radiation with vastly superior tarnish and corrosion resistance due to Nickel plating.
Polyester ripstop base fabric for toughness and light weight. Only 0.08mm thick. Surface Resistance: 0.01-0.03 Ohm/sq. Because Nickel may produce skin allergies, this material is not intended for direct contact with skin. Protective gloves are recommended when handling this material. 42.5 inch wide sold by linear foot.
 
This shiny, smooth polyester ripstop fabric is covered with pure Copper and Nickel coating.  Light weight and flexible. Easy to cut and sew, like an ordinary fabric. It has superior tarnish and corrosion resistance due to Nickel content, and it characterizes with high conductivity and RF shielding performance. 
 
Note: Nickel may produce skin allergies - handle this material with protective gloves. The material is not intended for direct contact with skin.

Nickel-Copper_Fabric_Smart_Meter_Shield

 

This shiny, smooth polyester ripstop fabric is covered with pure Copper and Nickel coating.  Light weight and flexiable. Easy to cut and sew, like an ordinary fabric. It has superior tarnish and corrosion resitance due to Nickel content, and it characterizes with high conductivity and RF shielding performance. 

Note: Nickel may produce skin alergies - handle this material with protective gloves. The material is not intended for direct contact with skin.

USAGE: use Nickel-Copper Fabric for drapes, wall covering and protection against radiation emitted from smart meters.

Thickness: 0.08mm (3 mil) 
Width: 42.5 inch 
Weight: 90 g/m² 
Resistivity: 0.03 Ohm/sq 
Temp range: -40°C to 150°C, up to 200°C short term 
Color: Silver 
Base: Polyester 
Conductor: Nickel/Copper plated

*Set also includes 3 feet long grounding cable for Nickel-Copper fabric.

MATERIAL 2.
Microwave ABSORBING material with plastic coating (both sides) for easier handling. Using non-woven nearly-pure carbon fibers, to achieve both good microwave shielding and high absorption this carbon material is conductive in some forms, and a very good microwave absorber. 

RF_shield-Absorbing_performace_graphApplication Notes: 
1- Double or triple the layers of MW Absorbing Sheet to increase effectiveness. 
2- To create a super high performance enclosure, combine a layer of this Microwave Absorber material with a layer of a high performance fabric shield such as Nickel Copper Ripstop (incliuded in this set). Line the inside of the shield with Absorber. It will scavenge any RF which might leak in. 
3- Grounding is not necessary with this material. 
4- Minimize repeated bending/flexing of this material

Now with plastic coating for easier handling this carbon material is conductive in some forms, and a very good microwave absorber. Using non-woven nearly-pure carbon fibers, to achieve both good microwave shielding and high absorption, this unique material has the following specifications:

USAGE: use Carbon fiber fabric for drapes, wall covering and protection against radiation emitted from smart meters.

Carbon base material (with plastic laminate):
Width: 48 inch (1219 mm)
Weight: 34 g/m²
Thickness: 26 mil (0.64 mm)
Resistivity: ~3 Ohms per Square (but surface is not conductive because of the laminate covering)
Tensile: 47 N/15mm


How Much Area Do I need to Cover to Shield from Radiation?Magentic_Fields_Area_testing_method

The amount of shielding that you will achieve depends on many factors, including the size and shape of the shield. When using a flat shield on a wall, floor, or ceiling to shield a source of field that is close to the shield (within 8 inches), plan to cover an area that extends at least to the 2 mG line.

Method:

1- Using your measuring device, slide along the surface of the wall to locate the hot spot to be shielded. 
2- Now slide the measuring device to the right, to the left, up, and down to identify how far you must shield to get to the 2 units line.

Make sure to check for additional sources of magnetic field (lights, wiring, appliances and so on), that may be located inside adjacent walls, floor, ceiling or within the same room.

3134 Fait Ave.,, Baltimore, Maryland 21224. Telephone: +1-410-417-7225, E-mail: info@adrprovita.com 

SEO Training by JM Internet Group © 2014 AdrProVita All Rights Reserved.